The Saturn is Proto's widest deck plate available currently. It's the go-to option if you're looking for a pro scooter deck that has the most foot space, and grind space available. The top plate of the Saturn also features the "Arch Bar" in the middle of the deck. The Arch Bar is designed to provide extra traction, and preserve the deck's concave without reducing strength, or increasing weight.

You'll be able to keep your feet centered on the deck and have more control without having to wrap your toes around the edge of the deck to whip. 

Andrew Broussard created the TDI (Tunglok Deck Integration) deck system to resolve the issues that welded decks bring. To put it simply, the neck of a scooter deck is the strongest point while the extrusion (deck plate) is the weakest. Thismeans that if you were to break a welded scooter deck, you’d be left with a completely unusable product and you’d be forced to replace the entire unit.

The TDI system resolves this by using a two-piece deck that allows you to replace the deck plate when it’s worn out, but keep the neck, and hardware from the original pieces that will last multiple deck plates. Andrew also designed the neck so that it's compatible with every Proto deck plate available so customization is endless.

Note: This is just the Deck Plate. To create a Full Deck you will need the following; Neck,Deck, Deck End Kit, and Brake (any brake with a vertical brake bolt pattern will fit the deck). We recommend the PROTO UBS Brake hardware as well.

Technology:

TDI (TUNGLOK DECK INTEGRATION) US PATENT #8,528,921

TDI is a system of compatibility. This system was designed so that the deck (DEX) and neck (NEX)/head-tube are separate components that are mated together utilizing a tongue and groove system with bolts to keep everything in place. The TDI system allows for interchangeable neck/decks allowing for maximum customization and upgrades of  a single deck or neck. When your deck wears

out on a TDI system you only need to replace the deck itself instead of the entire neck/deck assembly like a one-piece deck. TDI has been rigorously team tested under the feet of a long list of some of the most talented, progressive and influential street riders world wide.

• Weight: 21.5": 5.05 lbs
  22": 5.10 lbs
  22.5": 5.20 lbs
  23": 5.30 lbs
  23.5": 5.35 lbs
  24": 5.40 lbs

• Length: 21.5", 22", 22.5", 23", 23.5", 24"

• Width: 6"

• Foot Space: 21.5": 14.5"
  22": 15"
  22.5": 15.5"
  23":  16"
  23.5": 16.5"
  24": 17"

• Material: Aluminum T6061

• Headtube Angle: 84

• Axle Size Compatibility: M8

• Wheel Diameter Compatibility: Up to 125mm

• Wheel Width Compatibility: 24mm

• Peg Compatibility: Front: yes, Back: yes..technically no (the deck uses pegs as its dropouts, but it will only fit Proto Deck ends)

• 12 STD Compatibility: No

• Grip Tape Included: No

• Hardware/Brake Included: No hardware, no brake. Brakes with a linear pattern are compatible with Proto's UBS system.